Important Information – please read very carefully All products of MONACOR INTERNATIONAL are tested continuously to ensure a constant quality level and to maintain quality standards. All products which are subject to the CE guidelines as well as the electric and electronic subassemblies which are subject to the directive for motor vehicles are tested according to the respective standards and carry the CE mark. These products can thus be sold in all EC countries without further tests or approvals. General Information • All rights reserved by MONACOR INTERNATIONAL GmbH & Co. KG. All contents of our catalogues, brochures and websites including texts, product images and graphics serve as information as to the products by MONACOR INTERNATIONAL only. No part of this catalogue including text, photos of products, graphics - or any parts thereof - may be reproduced in any form or by any means for any commercial use without our express prior written consent. • Windows is a registered trademark of Microsoft Corporation in the United States and other countries. • The software available on our websites is partly an ’Open Source Software’ which is licenced under ’General Public License’ (GPL). Further information can be found at the following link: http://www.gnu.org/licenses/. • HDMI™ is a registered trademark of HDMI Licensing L.L.C. • We cannot be held responsible for printing errors, should they occur. We reserve the right to make technical changes without prior notice. • Specifications stated are according to information provided by the manufacturer. • Technical data may vary slightly due to production tolerances. • Damage resulting from unauthorised servicing of the products thus causing changes as well as improper handling resulting in consequential damage are excluded from the warranty. We will not be liable for changes of the state of the products resulting from improper storage, other interventions or improper use. • Lithium batteries have to meet special regulations for transportation and storage. Before dispatching such products, please pay attention to the safety notes in the section ’Downloads’ on our website. • If the devices are interfered with, the CE approval will no longer apply. All products are usually suitable for indoor use only, unless stated otherwise. The products are not suitable for installations into aircrafts or for surface mounting onto aircrafts. • The devices do not correspond to the medical products directive 2007/47/EC. • If the devices are permanently taken out of operation, they must be taken to a local recycling plant for disposal which is not harmful to the environment. Technical Information • Before first use of the products, please read the instruction manual carefully! • The products correspond to the directive for electromagnetic compatibility 2014/30/EU, the directive 2011/65/EU (RoHS) with the addition EU/2015/863 and where applicable to the low voltage directive 2014/35/EU with the directive 2009/125/EC (ErP) and the regulation 2019/1782. • When operating with voltages of over 42 V, please always follow respective safety measures. • Before opening any product operated with 230 V mains voltage, disconnect device from the mains. • Make sure that the supply voltage is disconnected before working on components and modules. Existing capacitors must be discharged. • Mains cables and test cables must be checked for damage on a regular basis. Never pull on the cable to disconnect the plug from the socket. • Mains cables and fuses must only be replaced by skilled personnel. • Unless otherwise stated: – protect the products from moisture and heat, – always observe the admissible ambient temperature of 0–40 °C. • Do not use a very high volume level when using headphones. Permanent high volume may damage your hearing! Do not wear headphones while particular attention must be paid to your surroundings, e.g. in traffic. • A soldering process which is too long and too hot may cause damage to the corresponding products. Choose a soldering temperature that is suitable for the material used. No liability can be assumed for damage to the product or consequential damage caused by improper handling. • The plugs, jacks, switches, rotary switches and potentiometers shown in this catalogue are only suitable for connection to safety extra low voltage (SELV) or signal voltage unless the item is designed for a higher voltage (see text or table). • If the fixing nuts of panel jacks or panel plugs are overtightened, it may cause damage to the whole component. In case of improper handling, no liability can be assumed for this or any consequential damage. • The heat must be eliminated by air circulation. Therefore, do not cover ventilation slots with anything. Do not put or drop anything through the ventilation slots. Otherwise, there will be danger of an electric shock. • Only use a dry, soft cloth for cleaning the products. Chemicals must not be used in any case. • LED lights and LED lamps contain various components which may generate noise in unfavourable conditions. There may be audible resonances caused by installation, design of the lamp and the base as well as dimmer or transformer. Notes on Devices with Network/Internet Access Please note that each device connected to a network with Internet access is part of a worldwide network. In order to protect your privacy and to prevent unauthorised people accessing your network and the devices connected, please protect your login details with an individual password prior to initial installation. Please take this into consideration when assigning future passwords in connection with devices, software and apps available in the network, e.g. when setting up user accounts. Passwords should never be disclosed to third parties! Furthermore, please note that any device which has been connected to the network should be reset before being sold or disposed of. This is the only way to ensure that all your personal data is erased permanently. Information on the German Product Liability Act According to the law dated 15 December 1989 governing product liability which was last amended by the law dated 19 July 2002, manufacturers, importers and retailers are obliged to compensate for damage caused by a faulty product under certain prerequisites. A product can already be considered faulty if its presentation leaves a private, non-commercial end user with a wrong impression as to its safety in use or if it is to be expected that the private end user will not observe the required safety regulations when using the product or will apply an excessive operating voltage to it, except if this user has been informed as to the necessity to observe the safety regulations and specified voltages, etc. In your own interest and for your customers’ safety, therefore please draw your non-commercial customers’ attention to the following: The products listed in this catalogue may only be used for the stated purpose. If there are any doubts as to the purpose of the goods, questions must be clarified with an authorised expert or with the service department of MONACOR INTERNATIONAL. The following EN standards and VDE (Verband Deutscher Elektrotechniker = Association of German Electrical Engineers) regulations must be observed: Electromagnetic Compatibility: EN300422, EN301489, EN55032,EN55103-1, EN55103-2, EN61000-3-2, EN61000-3-3, EN61000-6-1, EN61000-6-3 Low Voltage Directive: DINVDE0100, DINVDE0532, EN62368-1, EN60335, EN60598, EN61010, EN62471 Motor Vehicles Directive: Directive 2004/104/EC In Germany, the above-mentioned regulations can be obtained from: VDE-Verlag GmbH VDE-Verlag GmbH Bismarckstraße 33 Postfach 120143 10625 Berlin 10591 Berlin Germany Germany Phone: +49 30 348001-0 Fax: +49 30 348001-9088 VDE-Verlag GmbH Kaiserleistr. 8 A 63067 Offenbach Germany Phone: +49 69 840006-0 Fax: +49 69 840006-1399 Notes Regarding the Approval of Wireless Systems The wireless microphone systems in the frequency ranges 863 MHz to 865 MHz and 2,4 GHz are generally approved and licence-free in the EU. The wireless systems in the frequency range 506 MHz to 542 MHz, 518 MHz to 542 MHz, 672 MHz to 694 MHz are generally approved according to directive 34/2020 and are licence-free in Germany. Every wireless system has been examined by a notified body and has been approved in the EU according to the RED directive. However, a frequency assignment for the systems in the frequency range 740 MHz to 776 MHz, 823 MHz to 832 MHz and 1.8 GHz for the corresponding area in which the device is to be used must be applied for at the respective national authority. There are restrictions or requirements within the EU. In Germany, the frequency assignment has to be applied for at the corresponding branch of the Federal Network Agency (BnetzA, Germany). The declaration of conformity can be found on our website: www.monacor.com, www.img-stageline.com or www.jts-europe.com. The forms for the frequency assignment can be found on the website of the Federal Network Agency www.bundesnetzagentur.de. For countries outside of Europe, please consult the authorities of the corresponding country. Please observe the notes in the operating instructions. MONACOR INTERNATIONAL GmbH & Co. KG; October 2021 MONACOR INTERNATIONAL – Your reliable partner – worldwide. Distribution of the brand JTS by MONACOR INTERNATIONAL in Germany, France, the Netherlands, Spain, Poland, Romania and Hungary. R161